Pedosphere 31(5): 807--821, 2021
ISSN 1002-0160/CN 32-1315/P
©2021 Soil Science Society of China
Published by Elsevier B.V. and Science Press
| Sensitivity analysis of the SWAP (Soil-Water-Atmosphere-Plant) model under different nitrogen applications and root distributions in saline soils |
Guoqing LEI1, Wenzhi ZENG1 , Yonghua JIANG2,3, Chang AO1, Jingwei WU1, Jiesheng HUANG1 |
1State Key Laboratory of Water Resources and Hydropower Engineering Science, Wuhan University, Wuhan 430072 (China);
2School of Remote Sensing and Information Engineering, Wuhan University, Wuhan 430079 (China);
3State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, Wuhan 430079 (China) |
| ABSTRACT |
| Sensitivity analysis is important for determining the parameters in the model calibration process. In our study, a variance-based global sensitivity analysis (extended Fourier amplitude sensitivity test, EFAST) was applied to an agro-hydrological model (the SWAP (Soil-Water-Atmosphere-Plant model) model). The sensitivities of 20 parameters belonging to 4 categories (soil hydraulics, solute transport, root water uptake, and environmental stresses) for the simulated accumulated transpiration, dry matter (DM), and yield of sunflowers were analyzed under three nitrogen application rates (N1, N2, and N3), four salinity levels (S1, S2, S3, and S4), and three root distributions (R1, R2, and R3). The results indicated that for predominantly loamy soils, the high-impact parameters for accumulated transpiration, DM, and yield were the soil hydraulic parameters (α and n), critical stress index for compensatory root water uptake (ωc), the salt level at which salt stress starts (Pi), the decline of root water uptake above Pi (SSF), residual water content (θr), saturated water content (θs), and relative uptake of solutes by roots (TSCF). We also found that nitrogen application did not change the order of the parameter impacts on accumulated transpiration, DM, and yield. However, TSCF replaced α as the highest-impact parameter for the accumulated transpiration, DM, and yield at high salinity levels (S2 and S3). Furthermore, α was also the highest-impact parameter for DM and yield under different root distributions, but the highest-impact parameters for transpiration were ωc, α, and θs under R1, R2, and R3, respectively. Nitrogen application could be neglected when considering the interactive effects of nitrogen application, salinity level, and root distribution on the transpiration, DM, and yield. Additionally, the mean values and uncertainties of the transpiration, DM, and yield were similar in all scenarios, except S3, which showed a sharp decrease in the mean values. We suggest determining the above eight parameters (α, n, ωc, Pi, SSF, θr, θs, and TSCF) and the saturated vertical hydraulic conductivity (Ks) based on rigorous calibrations with direct or indirect local measurements using economical methods (e.g., a literature review), with limited observations for other parameters when using the SWAP model and other similar agro-hydrological models. |
| Key Words: accumulated transpiration,agro-hydrological model,dry matter,hydraulic parameter,sunflower,yield |
| Citation: Lei G Q, Zeng W Z, Jiang Y H, Ao C, Wu J W, Huang J S. 2021. Sensitivity analysis of the SWAP (Soil-Water-Atmosphere-Plant) model under different nitrogen applications and root distributions in saline soils. Pedosphere. 31(5): 807–821. |
|
View Full Text
|
|
|
|
